1. Centifugal Spin Bulk contamination water oil and dirt enter and are spun in circular manner as the air flows vertically downwards.  This spinning action, which is naturally created by the patented element design, forces the heavy particles outward where they contact the inside of the bowl and drain to the bottom.   2. Inverse-Flow The patented inverse-flow process creates a condition where the air changes directions by 180 degrees from vertically downward to vertically upward.  This process prevents the re-entrainment of contamination which normally occurs.  Contamination, which is flowing vertically downward, is not capable of reversing direction and must separate from the air flow, falling to the bottom of the bowl.  This separation effectively pre-filters the air of contaminants thereby extending the life of the filter element.   3. Stainess Steel Element This first filter media which the pre-cleaned air enters is a deep bed of finely interwoven stainless steel mesh wires.  These wires have an extremely striated outer surface and will hold aerosols and liquid droplets which have survived the Inverse-Flow and Centrifugal Spin preocesses.  These small droplets will collect on the wire media, forming larger droplets which will fall into the drain area.  This stage also filter oil and dirt to 3 micron with 99% efficiency.   4. Friction Drying Consisting of interwoven cotton, polyester and stainless steel material, this final filter media captures sub-micron water droplets which have bypassed the stainless steel wire mesh.  The cotton holds the water particles and allows them to re-enter the air stream as a harmless vapour.  This stage also filters oil and dirt to 1 micron.

Eliminizer Application Dryer Removes 100% of liquid water and filters dirt to 1 micron. Incorporates patented Inverse-Flow technology and depth filtration.  Automatic drain and dual stage stainless steel & interwoven cotton/poly element.  Polycarbonate, aluminium or stainless steel bowls.  Point of use Application Dryer.
Eliminizer Combo Application Dryer Removes 100% of liquid water and filters oil and dirt to 0.01 micron.  Suitable for point of use applications.  Available from 1/4" to 1" with flows up to 150 scfm.  Includes automatic drain and element change indicator as standard.
Eliminex Mainline Separator Stops water and filters dirt to 3 micron. Suitable for high flow applications.  Patented Inverse-Flow technology and depth filtration.  Element features reusable stainless steel mesh.  Automatic drain as standard.  Available with 1/2" to 6" port sizes.
Eliminex Combo Mainline Separator Removes water and filters oil and dirt to 0.01 micron. Suitable for high flow applications.  Long life filter elements.  Automatic drain as standard.  Available with 1/2" to 6" port sizes.  First stage Eliminex element and second stage coalescer.
Eliminator II Desiccant Dryer Lowers dew point to -40°C.  For use with low flow applications.  Spin on, spin off desiccant cartridge allows easy service.  Automatic drain and differential pressure indicator on 1st stage.  Dew point indicator monitors desiccant material usage. Well suited for HVLP spray guns.
Stealth Application Dryer Removes 100% of liquid water and filters dirt to 1 micron.  Incorporates patented Inverse-Flow technology and a dual stage stainless steel & interwoven cotton/poly element.  Manual drain and metal bowl with low initial cost .