- VDMA Cylinder manufactured on 24 hour leadtime
- ISO Standard Valves, Sizes 1 - 4, & Mini Cylinders 8mm to 25mm bore
- Fully Configurable Valve Islands including Fieldbus Control Modules
- Rodless Cylinders
- Logic Elements including 'OR', 'AND', 'NOT', 'YES' Elements
- Guided Cylinders and 2 & 3 Jaw Grippers
- Standard Mechanical, Manual, Solenoid and Pilot Operated Valves
- Push in Fittings in both Nickel Plated Brass and Stainless Steel
- Universal Power Clamps - see below
COMPLETE INTERCHANGEABILITY with LAP/LNP series:
Interchangeable mounting
Interchangeable overall dimensions
Interchangeable models and options
Same inner linkage mechanism
ADVANTAGES FOR THE END CUSTOMER:
UNIVERSAL series:
Allows opening angle to be adjusted from 0° to 125° for the 40mm bore and from 0° to 135° for the 50, 63 and 80mm bore
Allows to set the opening angle with or without air supply
Reduces stock requirements: one UNIVERSAL unit can be used to set all possible opening angles
Can be used as direct replacement for LAP/LNP series
Increases productivity and decreases cycle time by being able to set the clamp to the minimum required opening angle
Guarantees the same reliability recognized by the market thanks to the use of the already proven inner linkage mechanism of the LAP/LNP series
Provides pneumatic ports on both sides of the cylinder
Is equipped with a UNIVER original all metal construction optical sensor, which is IP65 and includes a swivel connector which can be orientated in 0° or 90°
| Working pressure | 4 - 10 bar |
| Release pressure | 4 bar min. |
| Ambient temperature | -20 - 80 °C |
| Fluid | filtered air, lubricated or non lubricated |
Carriage is kept in position in both directions
Easy assembly, it can be mounted indifferently on both sides of the carriage
|
Compact Pneuma-Hydraulic Cylinder Design
PH series cylinder design is based around three co-axial tubes. The outer chamber houses the pneumatic cylinder, which provides the operating force. The central chamber houses the hydraulic piston, which enables stop/start functions and precision speed control. The inner chamber provides fluid connection across the hydraulic piston via the control valves. The combination offers a streamlined, high-tech solution, which is ideal for speed control and positioning systems.
(Click to download catalogue pdf)
Telescopic pneumatic cylinders Ø 25-63 mm 2-3 stages
Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution accomplished by the technicians of the company.
The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same stroke a reduction in size of approx. 45% (with a 3-stage telescopic cylinder) is obtained thus permitting the customer to foresee a considerable reduction of the project and construction of his equipment.
The cylinder can be supplied in magnetic version and with slide unit (only for 2-stage version).
(Click to download catalogue pdf)
